Categories
Computer science

Don′t forget to enable ip routing

Swamped with your writing assignments? Take the weight off your shoulder!

Submit your assignment instructions

Configure the network as follows: password is cisco
1) Use CDP or LLDP to verify links on layer 3 switches (include a snapshot of your output). YOu must enable cdp on the access switches for you to see its neighbors
2) Verify which ports are forwarding and blocking (spanning tree)
3) Optimize spanning tree with Core1 being root for VLANs 1 and 30 and Core2 the root for VLANS 10 , 20 100
4) Configure Etherchannel on the core switches
5) Core switches should support layer 3 interVLAN routing:
VLAN 1 = Core 1 = 10.1.1.251/24, Core 2 = 10.1.1.252/24
VLAN 10 = Core 1 = 10.1.10.251/24, Core 2 = 10.1.10.252/24
VLAN 20 = Core 1 = 10.1.20.251/24, Core 2 = 10.1.20.252/24
VLAN 30 = Core 1 = 10.1.30.251/24, Core 2 = 10.1.30.252/24
VLAN 100 = Core 1 = 10.1.100.251/24, Core 2 = 10.1.100.252/24
6) Access layer switches will only have management IP addresses in VLAN 1:
Switch 1 = 10.1.1.1/24
Switch 2 = 10.1.1.2/24
Switch 3 = 10.1.1.3/24
verify your network can ping
Don′t forget to enable ip routing

Swamped with your writing assignments? Take the weight off your shoulder!

Submit your assignment instructions

Leave a Reply